WE SELL DRY BILGES!
the dry bilge machine
Arid Bilge series 2 unit specifications 
Available with 1, 2 or 3 independently controlled intake ports (zones)
Height - 11.75 inches / 29.5 centimeters
Box width - 5.75 inches / 14.5 centimeters
Depth - 7 inches / 17.5 centimeters
Box dry weight - 8 pounds / 3.75 kilograms
Intake tubing - 5/32" diameter in 20 to 50 foot lengths
Unit Maximum Expected Flow Rate - 3.5 US gallons / 14 liters per hour
Power - 12 Volt DC standard / 24 VDC optional
Power draw - 0.07 amp (70 milliamps) average standby draw,
                      0.7 amp average run draw @ 12 volt DC w/ 1 active zone

Certifications - This unit meets USCG 33CFR 183.410 ignition protection
Two Series 2 units, a 2 zone on left and a 3 zone on right.

Intake ports - 5/32" Alkon push lock fittings.
Intake tubing - 5/32" Mazzer Polyethylene tubing, 50 feet provided per zone.

Single point discharge port - 1/2" barbed fitting.

Control: PLC Direct Logic 05 Koyo D0-05 processor, software proprietary.

Compressor / vacuum pump: Schwarzer Precision

Intake valves: N.C. Asco solenoid type.

Main unit material: Air injected white PVC plastic

Limited warranty: one year parts and labor.